Όλα τα Προϊόντα
Υπεύθυνος Επικοινωνίας : June Zhao

2W Non-maintained emergency packs with 3 hours duration and 5 years warranty

  • 2W Non-maintained emergency packs with 3 hours duration and 5 years warranty
  • 2W Non-maintained emergency packs with 3 hours duration and 5 years warranty
Τόπος καταγωγής Κίνα
Μάρκα Merrytek
Πιστοποίηση CE, UKCA, UN38.3, MSDS
Αριθμό μοντέλου KE036-02AM180HB
Ποσότητα παραγγελίας min 100
Τιμή Διαπραγματεύσιμα
Συσκευασία λεπτομέρειες Συσκευάζεται αρχικά σε σακούλα με φυσαλίδες και στη συνέχεια ενισχύεται με χαρτόνια για εξωτερική συ
Χρόνος παράδοσης 1, δείγμα και μικρή παραγγελία: εντός 5 εργάσιμων ημερών από τη λήψη της πληρωμής σας. 2, μαζική παρ
Όροι πληρωμής T/T ή Western Union
Δυνατότητα προσφοράς 10,000pcs ανά μήνα

Επικοινωνήστε μαζί μου για δωρεάν δείγματα και κουπόνια.

WhatsApp:0086 18588475571

WECHAT: 0086 18588475571

Skype: sales10@aixton.com

Εάν έχετε οποιαδήποτε ανησυχία, παρέχουμε τη 24ωρη σε απευθείας σύνδεση βοήθεια.

x
Λεπτομέρειες
Ονομαστική τάση εισόδου 220-240Vac 50Hz /60Hz Δύναμη έκτακτης ανάγκης 2W ((Μπορεί να προσαρμοστεί)
Ώρα Έκτακτης Ανάγκης 180 λεπτά (Μπορεί να προσαρμοστεί) Εγγύηση 5 χρόνια
Τεχνική διάταξη 10-60Vdc Θερμοκρασία εργασίας 0 ℃ ~ 50 ℃
Αξιολόγηση IP IP20 Τύπος μπαταρίας ΖωήPO4 6,4V 1800mAh
Επισημαίνω

2W LED emergency driver

,

non-maintained emergency packs 3 hours

,

emergency driver with 5 years warranty
Αφήστε ένα μήνυμα
Περιγραφή προϊόντων
2W Non-maintained Emergency Packs with 3 Hours Duration and 5 Years Warranty
Product Overview

Constant power output LED emergency power supply with wide output voltage range, featuring LifePO4 battery technology with 5-year warranty.

  • Constant power output LED emergency power supply with wide output voltage range
  • Input relay switching
  • High safety, high performance, long life LifePO4 battery
  • Integrated battery management system
  • Standard and self-test emergency packs
Technical Parameters
Charge Part
Model No. KE036-02AM180HB
Rated input voltage 220-240Vac 50Hz/60Hz
Rated input current 0.06A Max. @230Vac
Input inrush current 10A(Twidth=100us 50% Ipeak) @230Vac (Cold start at full load)
Power factor ≥0.5@230Vac
Input power <4W@230Vac
Battery charging current 250mA Max.
Battery charging time 24 hours Max.
Emergency Part
Operating mode Emergency mode
Load type LED
Emergency power 2W
Emergency time 3 hours
Load output current 200-30mA
Load output voltage 10-60Vdc
Battery
LifePO4 (The battery capacity meets the emergency time at 25℃) 6.4V 1.8Ah
Battery warranty Warranty 5 years @25℃
Product Dimensions
2W Non-maintained emergency packs with 3 hours duration and 5 years warranty 0
Unit: mm
Wiring Diagrams
2W Non-maintained emergency packs with 3 hours duration and 5 years warranty 1
Basic wiring diagram
2W Non-maintained emergency packs with 3 hours duration and 5 years warranty 2
Fig A: With LED driver and LED module
2W Non-maintained emergency packs with 3 hours duration and 5 years warranty 3
Fig B: With LED module
2W Non-maintained emergency packs with 3 hours duration and 5 years warranty 4
Fig C: Loop in & out with LED module
Operation Instructions
Manual Test Mode
  • Before installation, set Pin short: Manual Test
  • Connect the wire according to the wiring diagram
  • L, N power on, Switch on S1. Then the load lamp turns on, the emergency driver indicator light turns green, emergency power supply is normal charging. Turn off Switch S1; the load lamp turns off
  • Emergency Simulation: Switch on, the load lamp turns on, press the switch (TEST SWITCH), then switch to emergency mode, the indicator light of the emergency driver will be extinguished. Release the switch (TEST SWITCH), then the lamp is powered by LED driver, the indicator light will turn on
Automatic Test Mode
  • Before installation, set Pin open: Automatic Test
  • Connect the wire according to the wiring diagram. Remove the test switch on the LED Emergency Driver
  • L, N power on, start the clock, and perform a periodic self-test. To replace the battery, turn off the power supply, and re-time
Battery Application Notice
  • The battery should be recharged and discharged semiannually in normal use conditions
  • Do not connect to the circuit when the battery is not in use to prevent over-discharge of the battery due to self-consumption of the circuit board
  • Please keep the battery away from the heat source when installing and using, and only be allowed to be used in a certain working temperature range
  • The battery should be stored in a cool and dry environment
  • After long-term storage, the battery is cycled every 6 months as required
  • AC power is off, and the clock lasts for 7 days. Power on and re-time. To replace the battery, turn off the power supply, and re-time
All parameters are tested on the input voltage 230VAC, environment temperature 25℃, unless otherwise specified.
Ετικέττες:

οδηγημένος εφεδρικός οδηγός έκτακτης ανάγκης

το πρόγραμμα οδήγησης dimmable led

οδηγημένος μετατροπέας έκτακτης ανάγκης

Συνιστώμενα προϊόντα